Sealants & Adhesives

A range of sealants and adhesives used within Promat fire protection systems.

What is the consumption rate of Promacol®-S adhesive?

Promacol®-S adhesive can be applied as either a single or a double bond, with a consumption rate of approximately 500g/m 2 to 750g/m 2 . This depends on the application, nature of the substrate and application technique.
Where can I find Safety Data Sheets?

For safety data sheets for Promat products, please go to the Document library.
Where can I purchase Promat products?

Promat sell through a distributor network, click the link to Find a Stockist.
Do you have any specific jointing tape that works with Promat Moisture Resistant Ready-Mixed Joint Filler?

We would recommend using a self-adhesive glass or hessian scrim for board joints and internal angles. Paper jointing tape is not recommended.
Are Promat's products and systems subject to third party testing and accreditation?

In the UK, Promat endorses the use of third party accreditation bodies such as CERTIFIRE, UL and The Fire Accreditation Scheme (FIRAS) and believes that the credibility given by authorities like these gives the whole marketplace confidence in not only the product, but also the installation. Promat continue to push the development of fire protection
Can I use Promat Moisture Resistant Ready-Mixed Joint Filler® in a semi-exposed environment?

Promat Moisture Resistant Ready-Mixed Joint Filler® is suitable for both interior applications, and is also specially formulated for use in semi exposed and high-humidity environments as a joint and screw filler for Promat MASTERBOARD® or SUPALUX® for lining the underside of a carport, undercroft, etc. When used in a semi exposed location, a final
Where can I purchase Promaseal®-PL?

Promaseal®-PL can be purchase via Promat Industry in Haywood, for order enquiry please contact: Promat UK LimitedB1 The Innovation CentreHeywood Distribution ParkHeywood, Lancashire, OL10 2TSUnited Kingdom Phone: +44 (0)800 588 4444E-mail: industryuk@promat.co.uk
What is the consumption rate of Promacol®-K84/500 adhesive for Promatect®-H concrete upgrades?

When considering concrete wall and soffit upgrades, due to the nature of the installation of the Promatect®-H boards and the 100mm diameter dabs of adhesive on to concrete substrates that are required at each fixing point, where the dabs may be extremely thin in places and anything up to perhaps 2mm in others there is no definitive answer to this qu
What is Promat®-Glue K84?

Promat®-GLUE K84 is an inorganic, solvent-free adhesive based on water glass, modified with special fillers. It is used for bonding cement-bound calcium silicate building boards, vermiculite boards and mineral wool for all applications. Typically, it is used to glue joints in boards when used for ducting. For more information, please see the product